Mold and mildew can cause serious health risks. For tips on removing and preventing mold, contact your local health department or visit the California Department of Public Health's website.
Show All Answers
It depends on who is doing the work and when.
If you are a Construction Professional (i.e. a Licensed Contractor) or an owner/occupant doing your own construction on a site with an active building permit:
If you are an owner/occupant and are doing home maintenance not associated with a site with an active building permit:
Certain types of activities and noise sources associated with residential living are permitted under the City's municipal code. With the exception of gas-powered leaf blowers, low-noise generating power garden equipment (such as hedge clippers, weed-eaters, lawnmowers) is permitted as follows:
Please Note: Unless expressly permitted by the City of Mill Valley, landscape construction work is not permitted on weekends and holidays and must abide by the same rules as regular construction. This does not apply to landscape maintenance which must abide by the non-construction noise ordinance requirements.
Before you make improvements on your property or convert or remodel a structure, check with our Building Department to obtain information and required building permits. The City of Mill Valley requires a permit for replacing a water heater, and state regulations require seismic strapping of all water heaters when a building is sold.
This is true and most of what is exempt is work that is of a cosmetic nature only. However, this must be considered in light of how and why building codes have evolved over time. (Actually, a very long time; the earliest building codes can be traced back to the Code of Hammurabi, circa 1760 B.C.) The enactment of, and revisions to building codes are generally a direct result of failures from existing building techniques, and the disasters that often were a result of those failures.
Although the complexity of the codes have increased since the days of Hammurabi, what was true then remains true today; the intent of the building codes is to protect lives in the buildings and facilities we occupy and use.
If the steps outlined in previous FAQs have been completed, and the information contained in your plans is compatible with the Building Permits - Plan Submittal Requirements handout, as well as the Residential Design Guidelines and /or the Residential Design Review Handbook, you should be ready to submit.
Certain circumstances exist when the submittal may be incomplete, but the incomplete items may become what is referred to as, a deferred submittal. A deferred submittal is an element, or elements, that need to be part of the submittal at some juncture, but not necessarily critical information as far as getting the project started. In other words, Building staff may be able to issue the permit, but the missing information will need to be provided at some pre-determined point; usually contingent on how the information could impact the approval process on the project.
For example, plans for a major renovation are submitted, but the calculations and structural design for the truss roof may not be complete. The calculations and structural design will not affect the aesthetic design of the roof, so the calculations and structural design become a deferred submittal. However, the submittal is only deferred until the roof sheathing is to be installed. If the calculations and structural design have not been submitted to and approved by the Building Department staff prior to this juncture, work on the roof cannot progress, and there is a chance the project could be stopped altogether.
There may be many variations on deferred submittals, but the caveat is that the missing information cannot change the nature of the project as originally submitted. If it does, it becomes a revision and is subject to separate criteria.
If you are unsure if your project contains all the necessary information for submittal, a conversation with the appropriate Building Department staff member should provide the clarity necessary to get your submittal complete.
A number of variables play into this. Often, it depends on what the scope of your project is, and the number of departments and agencies involved in the approval process. Structural complexity, unusual design, and unorthodox construction methodology are among the many other issues that can impact the approval process. Due to the aforementioned variables, it is extremely difficult to provide an accurate timetable of the approval process. To avoid potential delays, contact us while the project is still in a conceptual phase. An open line of communication is often the most valuable tool in the approval process. Often we can provide information that may save a great deal of trial and error (and consequently, time) in the process. Working with designers who are familiar with the approval process in Mill Valley is often advantageous.
Nearly everyone wants to know "how long until my permit is ready to issue?" We understand how important your project is to you; it is not unreasonable to expect some kind of timeframe. On medium, to large projects, the standard processing time is four to six weeks, with the understanding that it will be approved as quickly as reasonably possible. However, a great deal of the responsibility for an expeditious approval is dependent on the initial level of relevant detail provided by the applicant. When plan check comments are generated, a timely and clear, complete response is the most efficient practice to keep the process moving. It may also be advantageous, if getting the project started is a priority, to wait until the permit is issued before submitting revisions. Revisions, except of a minor nature, must be processed in the same manner as a new submittal and considered on the basis of how they impact the entire project.
It is also important to note that Building is only one of the departments and/or agencies that may be involved in the approval process. One of the reasons why we state a long time frame is that approval by other departments or agencies may take much longer than the actual Building approval. Generally, the more approvals required, the longer it might take before your permit is ready to issue.
As with the building inspection process, there are time limits in the plan review process. If comments are not responded to within 180 days, or there is otherwise no activity on the applicant's part of the process, the permit application will expire and may have to be completely resubmitted. An extension may be granted for an additional 180 days if circumstances occur that would preclude the applicant from completing the process in a timely manner. The request for an extension must be in writing, prior to expiration, and signed by the applicant. It must be addressed to the Building Official and the reason for the request must be stated.
In general, a project must be approved and the permit issued before the actual work can begin. The California Building Code does allow an exception for emergency work if City Hall is closed when the event occurs. This is applicable only if the emergency is of such a nature that repairs must be initiated or life and/or property would be threatened. A permit for such work shall be applied for on the next business day.
We will issue a demolition permit in certain cases. Usually, it is issued for specific structural exploratory work, where certain elements need to be exposed to determine the level of repair or reconstruction necessary, for inclusion into the submitted plans. Another situation is the demolition of an entire structure, which is often allowed before the permit for the replacement structure is approved and ready to issue.
If you have a particular situation where you feel demolition might be appropriate before the project is actually approved, it will be considered on a case-by-case basis. Please be advised, however, that these cases are the exception rather than the rule. The multitude of factors and departments that are often involved in an alteration often preclude anything but specific, monitored areas of demolition.
A Road Impact Fee is assessed on any permit issued with a valuation of $10,000 or more, as per the Mill Valley Municipal Code. This fee has been in effect since 2004. The fee is equal to one percent of the valuation of the permit. The fees collected are not specific to the street in which the work is being performed but are deposited into a fund that helps the Department of Public Works maintain all roadways in Mill Valley.
The Drainage Fee is a one-time fee assessed to every parcel within the City, as per the Mill Valley Municipal Code. This fee has been in effect since the 1960s. Any permit with a valuation of $5,000 plus will trigger the assessment of this fee; with parcels, over one acre in size charged a double fee. Once the fee is paid, it is entered into a spreadsheet that tracks the collection activity so the property is not charged twice. This money is deposited in a fund that is used by the Department of Public Works to improve the City's drainage systems.
Please contact the Building Counter for information on a specific parcel.
Due to the potentially disruptive effects construction projects may have on a neighborhood, and sometimes the community in general, the Mill Valley Municipal Code has set specific time limits on project completion based on the project's valuation. This information can be found in Section 14.05.032 (G) of the Mill Valley Municipal Code.
We understand circumstances may prevent a project from being completed in a timely manner. Please contact us as soon as you are aware that your project may not be completed within the allotted time frame, and we will explore what options may be available to grant an extension.
When considering opening a business in Mill Valley, it is wise to contact the Planning and Building Department regarding zoning ordinances, use permits, etc. as part of planning your business model. It is highly recommended this consultation take place before entering into any sort of lease or purchase agreement. Once it is determined that the endeavor is feasible, the next stop should be Building if any sort of alteration to the interior or exterior of the structure that houses the business is being considered. At this juncture, we can advise you as to other departments or agencies that may be involved in the approval process, as well as which building codes and ordinances may be applicable.
A major consideration on the Building Department side is accessibility. Accessibility is defined in the California Building Code as: "the combination of various elements in a building, facility, site, or area, or portion thereof which allows access, circulation and the full use of the building and facilities by persons with disabilities." Almost any type of alteration will trigger the requirement for some degree of accessibility upgrade to the building or site.
Accessibility is an extremely complicated and potentially litigious subject. The importance of retaining experienced and competent accessibility consultants and/or design professionals as an integral part of your potential alterations and how they impact your overall business model cannot be overstated. While Building staff can advise on applicable code interpretations, we cannot act in the role of a consultant. Competent professionals may be worth their weight in gold in this arena.
Story poles need to go up a minimum of 10-days prior to the public hearing before the Planning Commission (the same time the public notice is sent out to property owners within 300 feet of the proposed project). This is intended to allow ample time for the public and Planning Commissioners to view the project dimensions.
Although obtaining a building permit is not a guarantee that your project will be problem-free, it does provide many benefits over non-permitted projects. Perhaps the most important benefit is that it provides an independent evaluation of the code-related aspects of your project. This process often actually begins when the project is still in a conceptual phase. Many times the information the Planning and Building Department can provide at this juncture greatly benefits an applicant in regards to the manner in which the project is ultimately structured and submitted. From initial inquiry through final approval, this "independent evaluation" is ongoing, to ensure that your project is compliant with all applicable building and municipal codes.
In addition to the above some of the more obvious advantages to obtaining a building permit are:
Yes. Building plans are protected by copyright laws, therefore approval of the architect, designer, or other design professionals who prepared the plans is required, in writing, before the plans can be copied. Plans, however, can be viewed on the computer in the lobby at City Hall.
Maintain your swimming pool with proper chemical treatments and cleaning or drain the water to prevent mosquitoes from breeding and potentially spreading West Nile Virus. Report abandoned and unclean pools to the Code Enforcement Officer or to Marin/Sonoma Mosquito and Vector Control, 800-231-3236 (toll-free) and 707-285-2200 (office).
Yes, a Sign Permit (PDF) is required since it is considered a new sign.
Observed holidays: The general rule is if the banks are open, you may do construction.
You can come down and see us at the Planning and Building Department at Mill Valley City Hall, 26 Corte Madera Avenue (next to Mill Valley Market), or you can phone us at 415-388-4033. A planner is available during regular business hours, and an inspector is available from 8 to 9 am or 4 to 5 pm every business day (we are closed every Wednesday morning and every other Friday). An inspector may be available during other regular business hours for consultation, but it is a good idea to call first and check.
Oftentimes, a quick conversation with a planner may validate whether or not a project is viable, and an inspector can provide information on the permitting process, code requirements, and other building-related subjects. They may also be able to determine if consultation with other departments and/or agencies prior to the design process is appropriate, depending on the scope of your project.
Some minor permits are issued automatically upon application. Permit cards will be mailed after an administrative review, generally within a week.
Some permits will require a minor review, in addition to the administrative review. You will need to submit plans.
Vacant structures can become targets for vandals, criminal activities, and a general nuisance for adjacent property owners. Contact the Code Enforcement Officer or Building Department for the proper procedures to secure the property and keep it secured.
Section 14.05.032 (G) of the Mill Valley Municipal Code requires that your first inspection must be scheduled within 180 days of the date the permit was issued, and "successive approvals" must occur every 180 days thereafter. "Successive approval" means the work is inspected and approved within the 180-day period. A typical scenario would be an inspection is requested and performed, a correction list is generated, and the corrections are completed, another inspection is scheduled to verify the corrections, and the next 180-day period begins from the date the corrections were "signed off", and the work in question allowed to be covered.
Upon request, a permit may receive a one-180 day extension. The request for an extension must be in writing and signed by the applicant, addressed to the Building Official, and the reason for the request must be stated.
It's important to note at this juncture that "successive approvals" must be based on "valid" inspection. A valid inspection generally involves completing all possible elements in a phase of the project before applying finishes, or otherwise covering the work. An example of this could be a bathroom remodel. We would not inspect the plumbing, electrical, framing, and mechanical elements separately; we would request that once all these elements were completed, the applicant would call for a "rough all" inspection. This means that all of the work involved is completed and ready to cover with sheetrock or other finishes.
With every permit that is issued, a copy of "Building Inspection FAQs" is included with the permit hard copy. The majority of information necessary for understanding the inspection process is included in this document. The inspection process for larger projects is covered in detail in the "Pre-Construction Meeting" handout. This is usually distributed as part of a project that requires a pre-construction meeting, but a great deal of the information is relevant to the inspection process in general.
To report a code violation regarding building, zoning, or Municipal code violations, call Ann Ivan at 415-389-4203 or email email@example.com.
Generally speaking, the benefits of hiring a licensed contractor far outweigh the perceived benefit of acting as your own contractor and managing the project yourself. Acting as your own contractor (especially if you are not experienced in construction techniques and procedures) has cost many an unwitting applicant more in the long run than what the cost would have been had they hired a competent contractor.
On the Building Permit Application, there are two spaces to check if you are obtaining the permit as an owner-builder. One is applicable if you are acting as an employer; the other, if you are exclusively contracting with licensed contractors. The forms required by California law are the Property Owner-Builder Declaration Form (PDF) and Verification Form (PDF).
The California State License Board website is an excellent source of information regarding the legal aspects of being an owner-builder, as well as the pitfalls of hiring unlicensed contractors. We strongly recommend that a potential owner-builder take the time to peruse the requirements and information included in these links.
Permit fees are based on the valuation of the project. Building staff will assist you in determining your cost. View a simplified version of our Building Department Fee Schedule (PDF).
Hoarding occurs when the clutter in people's homes impairs their basic living activities. Compulsive hoarding can cause fires, pest infestations, and other health and safety hazards. To evaluate a hoarding situation and develop an effective plan to address those involved, contact the Code Enforcement Officer.